setup a home wifi connection

How to setup a home wifi connection

In this article, we shall be looking at how to setup a home wifi connection. But before then, lets look at some of the key terminologies that you are going to come across on the course of this guide. Starting with WIFI

Wifi is an acronym for wireless fidelity.  It is a facility in a wireless form like a radio signal that allows computers, smartphones, or other electronic devices to connect to the internet or communicate with one another.

The signal is usually generated from a device called router. The wireless router sends a radio signal to a nearby device, which translates the signal into data you can see and use. The generated signals are transmitted to devices like Phones, Laptops and ip devices.

How to setup a home wifi connection

    1. Get the right router: The veritably first step in setting up a home WiFi network is to get the right router. It’s important to take into consideration factors similar as the probable distance between the router and the connected devices, the hindrance situations grounded on the number of devices operating within the area, the transfer speed needed, and security. It is also very important that the router have the latest form of encryption which is WPA2.
    2. Connect the router to the modem: Modem is a device that converts signals produced by one type of device (such as a computer) to a form compatible with another (such as a telephone) and that is used especially to transmit and receive information between computers via landlines. Some routers have a USB port in addition to a network port labelled WAN/WLAN/Internet. Connect the modem to the router. New generational modems have an inbuilt router and most of it are wireless.

      All you need to do is to configure the SSID of the router to a name of your choice like ‘Trishnet‘ The SSID is the name that will be visible to your device with which you can use to distinguish your Home wifi connection or network from other nearby wifi networks.

    3. Configure the SSID of the router: In order to setup a home wifi connection, you have to Login to the router dashboard and key in the name you want to be seen as the name of your home wifi connection.
    4. Set Wifi Password: This is the password with which you use to connect to your wireless network. It’s also called a Wi-Fi Security Key, a WEP Key, or a WPA/WPA2 Passphrase. This is another name for the password on your Home wifi network.
    5. Chose where to place the router. Once the wireless settings are configured and saved, the router needs to be strategically placed in a position, which facilitates the new WiFi connection to have maximum coverage. Any physical obstacle like concrete walls and pillars, between the WiFi router and the devices, will restrict users from enjoying the best WiFi network.
    6. Connect a device: any device that works on WiFi can be connected to the home WiFi network. The device will first search for the network. When the SSID shows up, you will need to enter the password based on the WPA2 encryption. The device will connect to the WiFi network. You can also open any web browser to test the network.

With this above listed guides, you can setup a home wifi connection with ease

Leave a Reply

Your email address will not be published. Required fields are marked *